Availability: | |
---|---|
Quantity: | |
1-Way 7-3.5 mm HDPE Micro Duct
FCST
1-Way 7-3.5 mm HDPE Micro Duct
Test | Characteristic | Test Method | Acceptance Criteria |
Raw Materials | |||
1 | Micro duct is manufactured with 100% virgin HDPE | ||
2 | Melt flow index | ASTM 1238 190℃ @ 2.16KG Load | ≤ 0.40 g/10min |
3 | Density | ASTM D792 | 0.940~0.958 g/cm3 |
4 | Environmental stress crack resist (F50) | ISO 4599 | Min. 96h |
Physical and Mechanical Properties | |||
1 | Visual appearance | Visual inspection | Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness. |
2 | Outer diameter | FCST | 7.0mm ± 0.1mm |
3 | Wall thickness | FCST | 1.75mm ± 0.10mm |
4 | Inner diameter clearance | Blowing steel ball | A 3.0mm steel ball can be blown freely through the duct. |
5 | Ovality | FCST | ≤ 5% |
6 | Pressurization | 5 minutes @16bar each duct | No damage and leakage |
7 | Kink | IEC 60794-1-2 Method E10 | ≤ 70mm |
8 | Tensile strength | Rate of extension: 100mm/min | ≥ 520N |
9 | Crush | Sample length: 250mm Load: 2450N Duration of Max. load: 1 min Recovery time: 1 hour | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
10 | Impact | IEC 60794-1-2 Method E4 1.0 J Impact, recovery time 1 hour | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
11 | Heat reversion | 110℃ ~ 23℃, 1 hour | ≤ 3% |
12 | Min. bend radius | 84mm | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
13 | Co-efficient of Friction | 750mm Diameter, 450°loop, 5kg mass | ≤ 0.1 |
14 | Color and printing | Visual inspection | As per customer specification |
Notice:Completed packages of the HDPE micro duct on drum can be stored outdoor max. 6 months upon the date of production.
Storage temperature: -40°C ~ +70°C
Installation temperature: -30°C ~ +50°C
Operating temperature: -40°C ~ +70°C
Packing Information
Test | Characteristic | Test Method | Acceptance Criteria |
Raw Materials | |||
1 | Micro duct is manufactured with 100% virgin HDPE | ||
2 | Melt flow index | ASTM 1238 190℃ @ 2.16KG Load | ≤ 0.40 g/10min |
3 | Density | ASTM D792 | 0.940~0.958 g/cm3 |
4 | Environmental stress crack resist (F50) | ISO 4599 | Min. 96h |
Physical and Mechanical Properties | |||
1 | Visual appearance | Visual inspection | Ribbed inside & smooth outside surface, free from blisters, shrink hole, flaking, scratches & roughness. |
2 | Outer diameter | FCST | 7.0mm ± 0.1mm |
3 | Wall thickness | FCST | 1.75mm ± 0.10mm |
4 | Inner diameter clearance | Blowing steel ball | A 3.0mm steel ball can be blown freely through the duct. |
5 | Ovality | FCST | ≤ 5% |
6 | Pressurization | 5 minutes @16bar each duct | No damage and leakage |
7 | Kink | IEC 60794-1-2 Method E10 | ≤ 70mm |
8 | Tensile strength | Rate of extension: 100mm/min | ≥ 520N |
9 | Crush | Sample length: 250mm Load: 2450N Duration of Max. load: 1 min Recovery time: 1 hour | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
10 | Impact | IEC 60794-1-2 Method E4 1.0 J Impact, recovery time 1 hour | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
11 | Heat reversion | 110℃ ~ 23℃, 1 hour | ≤ 3% |
12 | Min. bend radius | 84mm | No residual deformation > 15% of inner and outer diameter, shall pass inner diameter clearance test. |
13 | Co-efficient of Friction | 750mm Diameter, 450°loop, 5kg mass | ≤ 0.1 |
14 | Color and printing | Visual inspection | As per customer specification |
Notice:Completed packages of the HDPE micro duct on drum can be stored outdoor max. 6 months upon the date of production.
Storage temperature: -40°C ~ +70°C
Installation temperature: -30°C ~ +50°C
Operating temperature: -40°C ~ +70°C
Packing Information